Winchester Model 190 Serial Number _HOT_
Download > https://byltly.com/2t7pgW
Click the image below to download the PDF document containing the serial number date-range information on many Winchester firearms. You will need the Adobe Reader program to open this file. Adobe Reader is available free from Adobe.
There is probably some kernel of truth to all of them. But the fact remains; there is no original, single, totally accurate database of serial numbers from 1866 forward that we are aware of. But perhaps these pages can help you somewhat in your research.
There are no serial number records for the Model 190, so it is not possible to determine an exact date of manufacture. That said, the Model 190 was introduced in 1964, and was discontinued in 1977. The high serial number on your rifle would lead me to believe that it was made within just a few years of the 1977 discontinuance.
And just exactly why not? A serial number provides no information other than the date of manufacture, and for the really old Winchesters (pre-1910) it can provide the ability to determine what the original as built configuration of the subject gun was.
Hi Bert, Thank you for the 180 - 190 clarification on my 22 rifle - I never noticed that before - would you happen to know or have an educated guess as to when serial number B857446 would have been manufactured ?
As I mentioned very early in the is topic string, there are no published lists of available records. That stated, the "B" prefix on the serial number was instituted in late 1968 after the GCA (Gun Control Act) of 1968 became law. Therefore, if the serial number does not have a "B" prefix, it was manufactured sometime in the 1964 - 1968 time frame.
Some of the odd serial numbered ones I have heard were a salesmans show piece. Not sure if it's true. They are a bit of a bear to clean. Mine shots shorts pretty decently, high velocity rounds probably would slam the bolt back pretty hard. As for jamming, not much until it starts getting dirty. I don't see them at gunshows very much. Probably the only reason I like it is I can run shorts through it. Prefer the Marlin 60 for ease of cleaning and accuracy.
I have one with stamped checkered stock and forearm similar to the 290,serial number B21476XX.Maybe mine was made very close to the end of the production run and Winchester used 290 forearm and stocks on it?
McPherson had discussed the case with the engineer, John Mason, who according to Bingham had initially worked on the "faces 3 editing system." Mason told McPherson that he had seen the same device in [91 Cal. App. 3d 469] Bingham's possession after the fire. Additionally, McPherson informed the fire marshal of the following: He "learned from Mr. Mason that on or about the month of February, 1977 [eight months after the fire], Mr. Mason personally observed Mr. Ward Bingham remove the serial numbers from a velo-bind [sic] system. Mr. Mason said that he observed this occur at 374 West Washington, Sunnyvale. Mr. Mason also told Mr. McPherson that on December 29, 1977, he observed in the place where Mr. Ward Bingham now works, Industrial Telephone System Company, the faces 3 editing system that he constructed for Mr. Bingham, the blue ray machine and the velo-bind, ... Mr. Mason personally knows that the faces 3 editing system that he observed at ITS was the same faces 3 editing system that Johnston Associates ... also partially constructed." McPherson had also interviewed three of the six Johnston Associates engineers mentioned by Bingham. They told him that the faces 3 editing system was being worked on in the Johnston Associates premises at the time of the fire, and that Bingham had "personally picked the Faces 3 editing system [upon which they had worked] up from Johnston Associates approximately four months after the fire at Bingham Aviation and Electronics." 2b1af7f3a8